Development Server

Glossary

Term Definition
Asset Redundancy An onsite asset, system, or piece of equipment that can sustain operation of a critical asset in the event the primary asset/system/equipment fails. The asset redundancy must not already be in use for other purposes and must be pre-installed and/or pre-configured to take over for the critical asset for an indefinite length of time. It must be capable of fully replacing at least one unit of the critical asset, if the critical asset is defined as a group of units of the same piece of equipment (e.g., one server redundancy for five servers, or the n+1 redundancy policy).
Consequence The impact of a disruption to a site’s key process(es) – and therefore production of key product(s). The severity of impact associated with a scenario in which a threat or hazard is realized and protective safeguards fail. Used interchangeably with impact in the STIR.
Continuity of Operations (COOP) An effort taken to ensure key production-essential functions continue to be performed during a wide range of emergencies, including localized acts of nature, accidents, and technological or attack-related incidents.
Critical Asset An asset, piece of equipment, or a system required to enable a key process. Critical assets may depend on the supply of energy or water and can be negatively impacted by disruptions to these systems. They may also be impacted by failures inherent to their characteristics (e.g., a component of the critical asset breaks).
Critical Input A material or component input required to accomplish a key process; a lack of this input will cause the plant to be unable to accomplish the key process.
Criticality Weighting A numeric value that assigns a relative importance of a key process to the production of a plant’s key product(s).
Dependencies Systems, processes, or people that rely on another entity or system to perform a specific function. For example, water systems typically rely on energy systems for treatment and distribution. When power is disrupted, impacts may cascade to cause disruptions in those non-energy specific, but still reliant, processes.
Energy and Water Resilience Planning

Key elements and outcomes include:

  • Optimized operations to reduce energy and water use, as well as peak demand, that enable the site to meet energy and water requirements.
  • Trained personnel and capabilities to anticipate, prepare for, adapt, withstand, respond to, and rapidly recover from energy and water disruption due to planned or unplanned events.
  • Actionable strategies for diverse solutions that address resource and infrastructure needs to minimize the consequence of interruptions of energy and water services to the production of key products during both normal and disrupted operations.
FEMA National Risk Index An open-source dataset created and maintained by the U.S. Federal Emergency Management Agency that provides estimated frequencies and risk-related metrics for 18 natural hazards across all U.S. states and territories.
Frequency The recurrence of a potential disruptor, such as a hazard or threat, asset failure, or supply chain disruption. In the STIR, (annual) frequency refers to the number of times a disruptor is expected to occur each year and is analogous to likelihood.
Hardening The act of instituting or installing mitigations.
Hazard A natural or accident-based driver with the potential to disrupt a plant’s production and key processes, via the disruption of energy or water supplies or on-site equipment (e.g., supply redundancies). Examples of natural hazards include earthquakes, storms, and wildfires. Examples of accident-based hazards include dam failures, train derailments, and industrial incidents. May also refer to the likelihood that such an event will occur, quantified as the probability of the hazard being realized. In the STIR, hazards and threats are considered together.
Interdependency A mutual reliance between two systems.
Key Process A process that must be operational to produce a key product for the manufacturing plant.
Likelihood Synonymous with probability, likelihood generally refers to the chance that a hazard or threat (or other risk scenario-initiating event, such as an asset failure or supply-chain disruption) will occur or that a safeguard will fail or succeed (often quantified as vulnerability). It commonly represents an expected event frequency.
Mutual Aid Agreement Establishes the terms under which one party provides resources (e.g., personnel, teams, facilities, equipment, and/or supplies) to another party.
Natural Hazard A hazard associated with an act of nature such as severe weather (e.g., winter storms, floods, hurricanes, and storm surges).
Plant Any facility or collection of facilities that is located on a single campus and included in the STIR assessment.
Resilience Broadly refers to the ability to anticipate, prepare for, and adapt to changing conditions and to withstand, respond to, and recover rapidly from disruptions through adaptable, holistic planning and technical solutions.
Resilience Gap Exists where risk – as a function of frequency, vulnerability, and consequence – exceeds a defined acceptable threshold or where conditions do not meet specific established resilience goals, standards, or best practices.
Resilience Planning Seeks to reduce potential impacts to operations from planned and unplanned disruptions via integrated and diverse solution sets. It is an iterative process that needs to be regularly revisited as part of an organization’s operations.
Risk The potential for an unwanted outcome resulting from an event, or sequence of events. Quantified in terms of the likelihood the event occurs and the consequences associated with the event. The STIR assesses risk from energy and water outages, critical asset failures, and supply chain disruptions.
Supply Redundancy An onsite asset, system, or piece of equipment that can supply energy or water in the event of a disruption to the primary supply of that resource. It may be operational for a limited or an indefinite length of time.
Technological Hazard Hazards associated with the potential for adverse impacts resulting from accidents or the failures of systems and structures to meet their design or operational intent. Examples include bridge collapses and grid outages. May be caused by random system failures or external influences, such as a vehicle impact with a piece of equipment. Outcomes of technological hazards may overlap with those from threats, but technological hazards do not involve malicious intent.
Threat An adverse event associated with malicious intent to create negative impacts. May also refer to the likelihood that such an event will occur, quantified as the probability of the threat being realized. In the STIR, hazards and threats are considered together.
Tolerable Disruption Duration

Used in various contexts in the STIR to refer to the length of time during which a disruption is not consequential:

  • For key processes (TDDP): the length of time, after a key process is disrupted, before the plant experiences unacceptable consequences, such as impacts on revenues or failures to fulfill of contracts.
  • For critical assets (TDDA,P): the length of time that a key process can continue without access to the asset (i.e., after an asset disruption).
  • For critical inputs (TDDI,P): the length of time that a key process can continue after a supply disruption of a critical input. On-site inventories of a critical input as well as a key process’s ability to temporarily persist without the input should be considered.
Vulnerability The probability that safeguards or protections intended to mitigate the hazard or threat fail. Equivalently, this is the conditional probability of a consequence occurring given that the hazard or threat has been realized. Estimated via characterization of supply redundancies in the STIR.
Vulnerability Assessment Evaluates the potential vulnerability of the critical assets against a broad range of identified threats and hazards. Determines the sensitivity of a system’s infrastructure to the realization of specific threats or hazards and the potential disruption or loss of that system. Estimated through characterization of supply redundancies in the STIR.

Screening Tool for Industrial Resilience is a resource of the U.S. Department of Energy.

U.S. DOE Security & Privacy Accessibility Statement Freedom of Information Act (FOIA) Vulnerability Disclosure Policy USA.gov

THIS SITE IS ONLY FOR DEVELOPMENT AND INTERNAL TESTING

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.